Run the installer
One command installs OpenLolo, turns on remote access and prints your setup card.
Run the installer on your LoloBox over SSH.
Use Debian 13 ARM64 or Raspberry Pi OS 64-bit (Trixie). The installer stops on other systems.
The output below is an example. Your addresses, password and QR codes will differ. Scan the codes in your terminal.
Run the install command
Run:
curl -fsSL https://openlolo.com/install.sh | sudo shFor Cloudflare or no remote access, see Install options.
Wait a few minutes for the install to finish. On a Radxa ZERO 3W, the installer also turns on the PiSugar 3 battery connection. Restart the box once after installation.
Approve remote access
When prompted, sign in to Tailscale and approve the box.
Installed OpenLolo 0.0.2.
Remote access (Tailscale)Approve this box: open the link or scan the QR code below.
To authenticate, visit:
https://login.tailscale.com/a/1a2b3c4d5e6f
█▀▀▀▀▀▀▀█▀▀▀▀▀▀█▀██▀███▀▀▀▀▀▀▀██ █▀▀▀█ ██▄▀ ▄▄██ ▀▀▄ █ █▀▀▀█ ██ █ █ █ ▄▄▄█ ▀▀▄██ █ █ ██ ▀▀▀▀▀ █ ▄▀▄▀▄▀█ ▄▀▄▀█ ▀▀▀▀▀ ██▀███▀█▀▀ ▄█▀ █▀█ █▀▀▀▀▀▀▀██▀██▄█▄▀▄█▀▄▀▄ ▄▀▄▀ ▀█▄█▀█▄▄▄▄▄▄ ██▀ ▀█▄▀▄▀▄█▄ █▄█▄ ▄ ▀▄█▄▄▄█ ▄██▀▄ █ ▀▀▀▄▀▄▄ ▄ ▄ █▀█▄▄ ▄ ██ █▀ ▀▄▀ █ ████ █ ▄ █ █████ ▄██▄▄▄▄█▄▀▀▀▄█▀▀ ▀ █ ██▄ ▄ ▄▀▄ ██▀▀ ▀ ▄▀█▄▄▀▄███▄▄ █ ▀ ▀█▄ ██▀▀▀▀▀▀▀█ ██ ▀ ▄▄ █▀█ ▀▀█ ██ █▀▀▀█ █▀▀█▄█▀▀▄ ▄ ▀▀▀ ▀█▄▀██ █ █ ██ ▀██ █▀▄█ ███▀▀▀ ██ ▀▀▀▀▀ █▀▀▀█▀▀▀▀█ █ ▄ █ █ ▄█▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
Success.Turning on Funnel. If Tailscale shows a link, open it and approve.Save your Remote MCP URL: https://raspberrypi.tail1234.ts.net/mcp- Open the login link on your computer or scan the QR code with your phone.
- Sign in to Tailscale and approve the box.
- If Tailscale shows a Funnel link, open it and approve. Press Enter if asked.
You can copy this Remote MCP URL from the box page later. See Find your MCP URL.
If remote access fails, the box still works on your home network. Use the printed command to retry later.
Save your setup card
Save the setup card with your Wi-Fi name, password and two iPhone QR codes.
iPhone setupConnect the iPhone by USB. Unlock it and tap Trust if asked.Scan both codes below with the iPhone camera, in order.
Wi-Fi name (SSID): OpenLolo-3F9A2C7EWi-Fi password: k7pq-x3mr-9tdh-w2neSetup page: http://openlolo-3f9a2c7e.local (or http://192.168.4.1 on the setup Wi-Fi)1. Join the setup Wi-Fi█▀▀▀▀▀▀▀███▀▀▀▀▀██▀▀▀▀█▀███▀▀▀▀▀▀▀██ █▀▀▀█ ██▀▄ ▄ ▄ █▀█▀ ▄▀▄▀█ █▀▀▀█ ██ █ █ ██ ▄▀█ ▄▄▀██ ▀▄▀▄█ █ █ ██ ▀▀▀▀▀ █ █ █▀▄▀▄ █ ▄▀█ █ █ ▀▀▀▀▀ ██▀██▀█▀▀█▀ ▀▀ ▀▄▄▄▄ █▄ █▄█▀█▀████████▄▀▀▀ ▀▀▄▄█▄▄ █▀▀ ▀ ▄ ██▀██▀ ▄ ██▄▄▀█▄▀▀▄█ █ ▄▄▀█▀█ ▀ █▄█▄ ▄▄▀▄███▄▄▀ ▄ ▀ ▀ ▄ ▀▄▀▄▄▄ ▀█ ▄▀ ▄▄▀███▄ ███▀█▀▄██▄▀ ▀▄▄▄█ ▀ ▄█ ▀ ██ ██▄▄▀█ █▀▀▀▀▄▀▄▄ ▄ ████▀█▄█ ▄▀▄██▀██▀▄ ▀▄▀ ▀ ▄▄▀▄█▄▀█ ▄ █▀ ▄█▄▀▀████▀ ▀▄ █▀▄▀▄▀██▀▄▄▀ █▀ ▄▀█▀ █▀██▀██▀▄ █ ▄▀▄▀▄ ▄▀ ▄█▀▀█ ▄▄▀ ▀ █ ▀██▀▀▀▀▀▀▀█▄▄█▀█ ▀█▄ ▄▄█▄█ █▀█ ▄ ███ █▀▀▀█ █▄▄ ▀▄▀▄▄█▄ ▄▄ ▄ ▀▀▀ █▀▄██ █ █ █▄ ▄▀█ ▄ █▄▀▄▄▀█ ▀▀█▀█▀██ ▀▀▀▀▀ █▀█▄ █▀▄▀▀ ▄▄▄▄▄█ ▄▄███▀██▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀2. Open the setup page█▀▀▀▀▀▀▀██▀███▀██▀██▀▀█▀▀▀▀▀▀▀██ █▀▀▀█ ██ ▄ █ ▄▄▀▀▄▀▄█ █▀▀▀█ ██ █ █ ██▀ ▀ ▄▀█ ▄██ █ █ ██ ▀▀▀▀▀ █ ▄ █ ▄ █▀█ ▄ █ ▀▀▀▀▀ ██▀██▀█▀▀█▀▄▄█▀█▄▀█▄ ▄▀▀█▀███████▄▀ ▀▀ ▀ ▀█▀▄▀█▄▄▀▀█▀█ █▀ ▀▀▄██▀▀▄▄ ▀ ▀▀▄▄▀█▄▄▀▀█▄ ▀ ▄▄ ▄ ▀█████▄█ ▀█▀▄██▀██ ▀▀█▄ █▀██ ▀▀██▀▀▀█▀▄▀▀▀ ▄▀▀ ▀ █▄█ ██▄ █ ███▀▄▄█▄ ▀▀█▀▄▀▄▀█▄█ ██ ▄ ▀▀█▀ ██▀█▄ ▄█▀██▄███▄▀▄ ▄▄▄ ▀▀▀▀█▀▄▄██▀▀▀▀▀▀▀█▄ █▄ ▀ ▄ ▀▄ █▀█ █▄ ▄██ █▀▀▀█ █▄ █ ▄▄▀▀ ▀▄█ ▀▀▀ █▄ ▄██ █ █ █▄█▀ ▀▄▄▄ ▀▄▄▄▄▄ █ ██ ▀▀▀▀▀ █▀██▄ ▄ ▄ ▄▀ ▀▄▄▀██ ██▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀Follow the setup page. Approve AI clients there under Access.Keep these details with the box.Keep the terminal open. Scan its QR codes in Pair your LoloBox.
To print the setup card again:
sudo -u openlolo /opt/openlolo/current/.venv/bin/openlolo setup-cardNext: Pair your LoloBox.