Pair your LoloBox
Connect your iPhone to your LoloBox. About five minutes.
Use the iPhone you want the AI to control. Turn on portrait orientation lock so the screen stays upright. Built your own box? Run the installer first.
The setup page moves on by itself after each step.
Turn on and open the setup page
- Connect your LoloBox to power.
- Scan the first QR code on the setup card to join the box's setup Wi-Fi. Or join it in Settings → Wi-Fi with the name and password on the card.
- Scan the second QR code and tap Start setup.
No internet?
That is expected on the setup Wi-Fi. Stay on it.
Lost the card? Print it again.
Plug in your iPhone and tap Trust
- Connect the iPhone to the box with a USB data cable. Leave it plugged in until setup is done. On a Radxa ZERO 3W, use the USB 3.0 port.
- Unlock the iPhone, tap Trust and enter your passcode.
Tapped Don't Trust? Unplug the cable, plug it in again and tap Trust. iPhone not found? Use a cable that supports data.
Turn on Developer Mode
- Open Settings → Privacy & Security → Developer Mode.
- Turn it on and tap Restart.
- After the restart, unlock the iPhone and tap Turn On. Keep it unlocked while the box prepares it.
- Return to the setup page. Rejoin the setup Wi-Fi first if needed.
Developer Mode not in Settings? Check the cable and that you tapped Trust.
Connect to your home Wi-Fi
- Choose your home Wi-Fi and enter its password.
- Join the same network on the iPhone if it does not switch by itself.
The page drops for a moment while the box switches networks, then finds the box again. Wrong password? The box reopens its setup Wi-Fi. Rejoin it and try again.
Your box is ready
Tap Enjoy with Lolo! to open the box page. Next, connect an AI.