Buttons and LEDs
Controls on the Radxa ZERO 3W + PiSugar 3 build.
Top button
| Gesture | Action |
|---|---|
| Press | Search for the phone. In Local mode, ends Local mode. |
| Hold, then release | Local mode: the box broadcasts its own Wi-Fi so the phone reaches the box page without a router. With no phone saved yet, this is Setup mode. |
The box acts about a second after you let go: the PiSugar 3 reports a hold only on release.
Factory reset
Reset proves you are next to the box:
- Start a reset on the box page.
- Press the top button the number of times the page shows (5 to 8).
- After 2 seconds without a press, the reset is armed. Hold the top button within 30 seconds to erase the box.
A wrong count, a hold during the count or a timeout cancels it. A Raspberry Pi box without the button asks you to type the box name instead.
Power button
OpenLolo keeps the PiSugar 3 defaults. Power on with a short press, then press and hold. A long press cuts power at once.
A long press is not a clean shutdown. Shut down from the box page when you can.
Status LED
| LED | Meaning |
|---|---|
| Fast blink | Local or Setup mode: the box's own Wi-Fi is on |
| Steady on | Phone connected |
| Slow blink | Looking for the phone |
| Off | Not connected and not looking |